TOOLS NEEDED:Ratchet
Extension
8MM Socket
10mm Socket
10mm Wrench
7/16” Wrench
9/64” Allen Wrench
Flat Blade Screwdriver
….
21. Tighten the hose clamp, which secures the silicone hose to the throttle body.
22. Install the air filter onto the mass air sensor and then tighten hose clamp.
23. Reconnect the mass air electrical connection as shown.
24. Re-install the engine cover removed in step #2 and reconnect the negative battery cable and double check to make sure everything is tightened and properly positioned before starting the vehicle.
25. The C.A.R.B. exemption sticker, (attached), must be visible under the hood so that an emissions inspector can see it when the vehicle is
required to be tested for emissions. California requires testing every two years, other states may vary.
26. It will be necessary for all intakes to be checked periodically for realignment, clearance and tightening of all connections. Failure to fol-
low the above instructions or proper maintenance may void warranty.
ROAD TESTING:1. Start the engine with the transmission in neutral or park, and the parking brake engaged. Listen for air leaks or odd noises. For air leaks
secure hoses and connections. For odd noises, find cause and repair before proceeding. This kit will function identically to the factory system
except for being louder and much more responsive.
2. Test drive the vehicle. Listen for odd noises or rattles and fix as necessary.
3. If road test is fine, you can now enjoy the added power and performance from your kit.
4. K&N suggests checking the Air filter element periodically for excessive dirt build-up. When the element becomes covered in dirt (or once a
year), service it according to the instructions on the Recharger service kit, part number 99-5050 or 99-5000.
Download Hummer 77-3037 2003-07 H2 V8-6.0L Performance Intake Kits PDF Installation Instruction
Extension
8MM Socket
10mm Socket
10mm Wrench
7/16” Wrench
9/64” Allen Wrench
Flat Blade Screwdriver
….
21. Tighten the hose clamp, which secures the silicone hose to the throttle body.
22. Install the air filter onto the mass air sensor and then tighten hose clamp.
23. Reconnect the mass air electrical connection as shown.
24. Re-install the engine cover removed in step #2 and reconnect the negative battery cable and double check to make sure everything is tightened and properly positioned before starting the vehicle.
25. The C.A.R.B. exemption sticker, (attached), must be visible under the hood so that an emissions inspector can see it when the vehicle is
required to be tested for emissions. California requires testing every two years, other states may vary.
26. It will be necessary for all intakes to be checked periodically for realignment, clearance and tightening of all connections. Failure to fol-
low the above instructions or proper maintenance may void warranty.
ROAD TESTING:1. Start the engine with the transmission in neutral or park, and the parking brake engaged. Listen for air leaks or odd noises. For air leaks
secure hoses and connections. For odd noises, find cause and repair before proceeding. This kit will function identically to the factory system
except for being louder and much more responsive.
2. Test drive the vehicle. Listen for odd noises or rattles and fix as necessary.
3. If road test is fine, you can now enjoy the added power and performance from your kit.
4. K&N suggests checking the Air filter element periodically for excessive dirt build-up. When the element becomes covered in dirt (or once a
year), service it according to the instructions on the Recharger service kit, part number 99-5050 or 99-5000.
Download Hummer 77-3037 2003-07 H2 V8-6.0L Performance Intake Kits PDF Installation Instruction
Tidak ada komentar:
Posting Komentar