ReadyLift recommends suspension Inc. This system was installed by a professional. In addition to these instructions, professional knowledge of disassembly / reassembly procedures of installing and after the checks must be known.
PRODUCT SAFETY WARNING: Changing the height of the vehicle can lead to vehicle handling differently than a factory equipped vehicle. Extreme care must be used to prevent loss of control or rollover of the vehicle. Failure to change to drive your vehicle safely may result in serious injury or death. Suspension ReadyLift Inc. does not recommend the combined use of suspension lifts, lifts the body, or other lifting devices.
You should never use the modified vehicle under the influence of alcohol or drugs. Always drive your modified vehicle at reduced speeds to ensure its ability to control the vehicle in all driving conditions. Always wear your seat belt.
Notes pre-installation:
1. Special literature required: OE service manual for the model / year of vehicle. Refer to the manual for proper disassembly / reassembly procedures of OE and related components.
2. Adhere to recommendations when replacement fasteners, Retainers and keepers are called in OE manual.
3. Enlarge combinations of tire and rim could increase leverage on suspension, steering, and related components. When selecting combinations larger than OE, consider the additional stress could induce the OE and related components.
4. Post suspension system vehicles may experience drive line vibration. Corners may require tuning, run over tree may require replacement, trees may need to be lengthened or truede, and U-joints may need to be replaced.
5. Safe and correct use of the first vehicle to block the installation of ReadyLift Suspension Components Inc.. Always wear safety glasses when using power tools.
6. If the installation is done without a lift, ReadyLift aSuspension Inc. recommends changes back first.
7. Thanks to the possibility of loading and the initial ride height variances, the amount of lift is a given base. Final height dimensions may vary depending on the original vehicle attitude. Always measure the attitude before you start the installation.
Download Ford F-250 2005-2009 Super Duty 4WD w/o Motor Installation PDF Manual
PRODUCT SAFETY WARNING: Changing the height of the vehicle can lead to vehicle handling differently than a factory equipped vehicle. Extreme care must be used to prevent loss of control or rollover of the vehicle. Failure to change to drive your vehicle safely may result in serious injury or death. Suspension ReadyLift Inc. does not recommend the combined use of suspension lifts, lifts the body, or other lifting devices.
You should never use the modified vehicle under the influence of alcohol or drugs. Always drive your modified vehicle at reduced speeds to ensure its ability to control the vehicle in all driving conditions. Always wear your seat belt.
Notes pre-installation:
1. Special literature required: OE service manual for the model / year of vehicle. Refer to the manual for proper disassembly / reassembly procedures of OE and related components.
2. Adhere to recommendations when replacement fasteners, Retainers and keepers are called in OE manual.
3. Enlarge combinations of tire and rim could increase leverage on suspension, steering, and related components. When selecting combinations larger than OE, consider the additional stress could induce the OE and related components.
4. Post suspension system vehicles may experience drive line vibration. Corners may require tuning, run over tree may require replacement, trees may need to be lengthened or truede, and U-joints may need to be replaced.
5. Safe and correct use of the first vehicle to block the installation of ReadyLift Suspension Components Inc.. Always wear safety glasses when using power tools.
6. If the installation is done without a lift, ReadyLift aSuspension Inc. recommends changes back first.
7. Thanks to the possibility of loading and the initial ride height variances, the amount of lift is a given base. Final height dimensions may vary depending on the original vehicle attitude. Always measure the attitude before you start the installation.
Download Ford F-250 2005-2009 Super Duty 4WD w/o Motor Installation PDF Manual
Tidak ada komentar:
Posting Komentar